Signs of Problems with Your Hydraulics

If you would like to make sure that you are always well aware of when your hydraulics are starting to fail, you will want to simply take a look at the following three signs. This way, you will know when it is time to take action and hire someone to make the appropriate repairs for you.

Strange Noises

One of the symptoms that you might experience is the sudden onset of strange noises. The strange noises that you hear will usually be caused by either cavitation or aeration. Aeration is when there are contaminates from the air in the hydraulic fluid. You might find this sort of noise to sound similar to a knocking or banging noise, and it might take you by surprise when it starts to happen. The cavitation will take place where there is more fluid than is required by the hydraulic circuit. When this happens, an extreme amount of pressure is formed.

Raised Fluid Temperatures

The temperatures of the fluid should not go above 180 degrees. If it does, it is likely that there will be damages to the seals. Also, the fluid itself will begin to degrade in quality, and this can come with its own host of problems for your hydraulic system. In order to keep a close eye on the temperature of the fluid, you could purchase and then have a mechanic install a fluid-temperature alarm. This alarm will alert you to the fact that the temperature is above the normal range so you can take immediate action.

Slow Movement 

This might be one of the more obvious symptoms to spot, as you are likely to notice that the system is moving a lot slower than it usually does. You might find that this symptom is more noticeable after you are running the machinery for an extended period of time. It will start to slow down considerably, and there is nothing you are going to be able to do to speed it back up until you simply have the hydraulic problem repaired by a professional.

With those three signs of hydraulic trouble in mind, you should find it a lot easier to quickly spot a problem so it can be repaired in a timely manner. All you have to do now is find a hydraulics-repair professional such as Cam Co. With a professional already picked out, you will know who to call when problems do manifest.